BW-800 BNWAS

Bridge Navigational Watch Alarm System

 

BW-800 BNWAS

Danish manufacturer
IMO
B+D approved
Main panel for flushmounting

We can help you choose the correct solution for your BNWAS
- tailormade to fit your bridge

Please contact NAVTEAM sales department:

 

Typical installation on fishing vessel without captain's quarters

BW-800 1 BNWAS main panel for flush mounting
BW-801 1 reset unit with visual alarm (for flush mounting)
BW-802 2 alarm units with visual and audio alarm (for flush mounting)
BW-805 1 Motion sensor 12V DC (Up to 10 meter range)

 

Typical installation for medium sized vessel (2 backup Officers)

BW-800 1 BNWAS Main Panel for Flushmounting
BW-801 1 Reset unit with visual Alarm (for flush mounting)
BW-802 3 Alarm Unit with visual and audio alarm (for flush mounting)
BW-803 Selector unit (for flush mounting)
BW-805 1 Motion sensor 12V DC (Up to 10 meter range)

 

Typical installation for large vessel (6 backup Officers)

BW-800 1 BNWAS Main Panel for Flushmounting
BW-801 2 Reset unit with visual Alarm (for flush mounting)
BW-802 7 Alarm Unit with visual and audio alarm (for flush mounting)
BW-803 Selector unit (for flush mounting)
BW-805 2 Motion sensor 12V DC (Up to 10 meter range)

 

Power consumption Without activated alarms: 150 mA
Alarms (802 Alarm Unit): 200 mA. per unit
Mains supply 24V DC Mains supply must be secured against overcurrent with an external fuse (maximum 4A fuses)
Timer interval 3-12 min
Battery backup 24V DC Battery backup supply must be secured against overcurrent with an external fuse. Battery backup must be able to supply BW-800 for a period of 6 hours (min. 3 Ah battery backup). Maximum 4A fuses.
Display 2 LED displays (2 digits)
Protection Indoor units (800, 801, 802, 803, 805): IP22
Outdoor units (821 and 831): IPX6
Temperature range From -15 to +70 °C

 

 

BW-800 dim 

 

BW-810 wmb dim

Accessory
BW-801

Reset unit with visual alarm (for flush mounting)

RRP
BW-802

Alarm unit with visual and audio alarm (for flush mounting)

RRP
BW-803

Selector unit (for flush mounting)

RRP
BW-805

Motion sensor 12V DC (up to 10 meter range)

RRP
BW-810

Wall mounting box for BW-800 (H188 x W188 x D106 mm)

RRP
BW-811

Foundation small for reset unit (801)

RRP
BW-812

Foundation large for alarm unit (802)

RRP
BW-813

Foundation large for selector unit (803)

RRP
BW-821

Reset unit with audio alarm for bridge wing IP56 (wall mounting)

RRP
BW-831

Reset unit for bridge wing IP56 (wall mounting)

RRP